2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 319Get this manual
13-16 BRAKES Brake Discs
Disc Cleaning
Poor braking can be caused by oil on discOil on disc must be cleaned off with an oilless cleaning fluid such as trichloroethylene or acetone
A WARNING
These cleaning fluids are usually highly flammable and harmful if breathed for prolonged periodsBe sure to heed the fluid manufacturer's warnings
Disc Removal
Remove: Front Hub (see Front Hub Removal in WheelsTires chapter) Brake Disc Mounting Bolts [A] Brake Disc [B]
Disc Installation
The disc must be installed with the marked side [A] facing toward the steering knuckle Apply non-permanent locking agent to the disc mounting bolts Tighten:
TorqueDisc Mounting Bolts: 37 N'm (3.8 kgfm, 27 ftlb)
MINTH3tvtv1
After installing the discs, check the disc runoutCompletely clean off any grease that has gotten on either side of the disc with high flash-point solventDo not use one which will leave an oily residueC