2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 315Get this manual

2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 315

13-12 BRAKES Calipers
Caliper Removal
Remove the front wheel (see WheelsTires chapter) Loosen the banjo bolt [A] at the brake hose lower end, and tighten it loosely Unscrew the caliper mounting bolts [B], and detach the caliper [C] from the disc Unscrew the banjo bolt and remove the brake hose [0] from the caliper
CAUTION
Immediately wash away any brake fluid that spills_

Off the caliper is to be disassembled after removal and if compressed air is not available, disassemble the caliper before the brake hose is removed (see Caliper Disassembly)
Caliper Installation
Install the caliper and brake hose lower endOReplace the washers that are on each side of hose fitting with new ones Tighten :

Back to 2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual