2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 291Get this manual
12-50 FINAL DRIVE Rear Propeller Shaft
Rear Propeller Shaft Removal
Drain the rear final gear case oil (see Rear Final Gear Case Oil Change in Periodic Maintenance chapter) Remove: Swingarm [A] (see Swingarm Removal in Suspension chapter) Rear Propeller Shaft [B]
Rear Propeller Shaft Installation
Wipe the old grease off the front and rear end splines [A] of the rear propeller shaft [B] and apply new molybdenum disulfide grease in those Be sure to install the spring [C] on the pinion gear nut of the rear final gear case Install the rear propeller shaft while aligning the splinesHK120002S1 C
Rear Propeller Shaft Joint Boot Inspection
Refer to the Rear Propeller Shaft Joint Boot Inspection in the Periodic Maintenance chapter