2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 282Get this manual
FINAL DRIVE 12-41 Front Final Gear Case
Apply molybdenum disulfide grease to the spline [A] in the shifter [8] and inner surface [C] of the coupling Install the shifter and coupling on the pinion gear shaft [0] Apply grease to the oil seal lip [E] Press the oil seal [F] in the front final gear case so that the oil seal surface is flush [G] with the case end Special Tool- Oil Seal Driver, cjJ70: 570011506
Hold the front final gear case with the gear holdersocket wrench [A] in viseSpecial Tool Gear HolderSocket Wrench, Hex 24: 570011489
Install: Washer [A] Front Final Gear Case Coupling Nut [8] Tighten: