2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 281Get this manual
12-40 FINAL DRIVE Front Final Gear Case
Apply engine oil to the needle bearing [A] Install Needle Bearing Outer Disc [B]
Apply engine oil to the variable front differential control shaft [A] Install the shaft and spring [B] in the front final gear case left cover [C] as shown
Turn the shaft counterclockwise and insert the tab [A] of the shift shaft into the groove [B] of the cam plate Install: Front Final Gear Case Left Cover [C]
Apply non-permanent locking agent to the cover bolts [14], and tighten them following the tightening sequence as shownTorqueFront Final Gear Case Left Cover Bolts (M6)[18]: 9.8 N'm (1.0 kgf'm, 87 ftlb)