2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 274Get this manual
FINAL DRIVE 12-33 Front Final Gear Case
Front Final Gear Case Oil Level Inspection
Park the vehicle so that it is level, both side-to-side and front -to-rear Remove the filler cap
CAUTION
Be careful not to allow any dirt or foreign materials to enter the gear case Check the oil levelThe oil level should come to the bottom of the filler opening [A]If it is insufficient, first check the front final gear case for oil leakage, remedy it if necessary, and add oil through the filler openingUse the same type and brand of oil that is already in the final gear case Be sure the O-ring is in place, and tighten the filler capOApply grease to the O-ring TorqueOil Filler Cap: 29 N'm (3.0 kgfm, 22 ft'lb)
Front Final Gear Case Oil Change
Refer to the Front Final Gear Case Oil Change in the Periodic Maintenance chapter
Variable Differential Control Lever Play Inspection
Refer to the Variable Differential Control Lever Play Inspection in the Periodic Maintenance chapter