2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 220Get this manual
CRANKSHAFTTRANSMISSION 10-21 Transmission
Install the guide [A] Tighten: TorqueShift Lever Assembly Bracket Bolts [B]: 20 N'm (2.0 kgfm, 14 ftlb) Set the lever assembly in the neutral position [C] while turning the tie-rod [D]
000 not turn the shift shaft [EJ when setting the lever assembly on neutral positionOTurn the tie-rod until the rod [F] of the shift lever assembly contact with the guide [G], and then the tie-rod can be turned until 18At that time, the clearance [H] which can be made between the rod and the guide is -0.5 mm (0 -0.02 inOThis clearance is setting range for the neutral position OMove the rod [F] to right and check it will be back to left smoothly Tighten: TorqueTie-Rod End Rear Locknut [I]: 9.8 N'm (1.0 kgf'm, 87 in'lb) Holding the rear tie-rod end, and tighten the front locknut [J]TorqueTie-Rod End Front Locknut: 9.8 N'm (1.0 kgf'm, 87 in'lb)