2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 215Get this manual
10-16 CRANKSHAFTTRANSMISSION CrankshaftConnection Rod
If the measured crankpin diameter [A] is not less than
Crankpin Diameter Marks None: 39.98439.992 mm (1.57421.57449 in 0:
the service limit, but does not coincide with the original diameter marking on the crankshaft, make new mark on it
39.99340.000 mm (1.57452 -1.5748 in
Hl0500 1BSl C
Crankpin Diameter Mark [8]: "0" mark or no mark Measure the connection rod big end inside diameter, and mark each connecting rod big end in accordance with the inside diameter Tighten the big end nuts to the specified torqueTorqueConnecting Rod Big End Cap Nuts: 34 Nm (3.5 kgfm, 25 ftlb)
o The mark already on the big end should almost coincide
with the measurement because of little wearConnecting Rod Big End Inside Diameter Marks None: 43.00043.008 mm (1.69291.69323 in