2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 167Get this manual
6-16 CONVERTER SYSTEM Drive Pulley
Drive Pulley Inspection
Disassemble the drive pulley (see Drive Pulley Disassembly) Visually inspect the sheave surfaces [A] for damageIf the sheave surfaces appear damagedreplace the sheaves
Visually inspect inside of the drive pulley cover bushing for damage Measure the cover bushing inside diameter [A] If the cover bushing is damaged or worn, replace the drive pulley coverCover Bushing Inside Diameter Standard: 27.98528.085 mm (1.10181.1057 in Service Limit: 28.12 mm (1.107 in
Visually inspect inside of the sheave bushing for damage Measure the sheave bushing inside diameter [A] If the sheave bushing is damaged or worn, replace itSheave Bushing Inside Diameter Standard: 37.98538.085 mm (1.49551.4994 in Service Limit: 38.12 mm (1.501 in