2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 129Get this manual
ENGINE TOP END 5-21 Camshaft
Remove: Circlips [A] Weights [B] Spring [C]
000 not remove the shaft [A} and pin [B}Off the parts are removed, they cannot be reinstalled
KACR Installation
Install: Weights Circlips Spring [A] OHook the spring from the outside with the open side of the hook inwards Install the KACR unit Hook the arms [B] on the pins Apply non-permanent locking agent to the camshaft sprocket bolts [C] and tighten themTorqueCamshaft Sprocket Bolts: 12 N'm (1.2 kgf'm, 104 in'lb)