2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 66Get this manual
FUEL SYSTEM 3-9 Throttle Lever and Cable
Swing the throttle control lever so that the carburetor throttle valve is fully openTurn the throttle limiter screw [A] until it is spaced about mm (0.04 in [8] away from the throttle lever stop [C]Tighten the locknut [D]
ORefer to the Owner's Manual for the function of the throttle limiter and adjustment procedure of it
Operation with an improperly assembled throttle case could result in an unsafe riding condition
Check the throttle lever free play (see Throttle Lever Free Play Inspection in Periodic Maintenance chapter)
Throttle Cable Installation
Lubricate the throttle cable before installation Route the cable correctly according to the Appendix chapter
A WARNING
Operation with an improperly adjusted, incorrectly routed, or damaged cable could result in an unsafe riding condition
Check the throttle cable (see Throttle Lever Free Play Inspection in Periodic Maintenance chapter)