2005-2009 Kawasaki Brute Force 650/KVF 650 4x4 Service Manual, Page 41Get this manual
PERIODIC MAINTENANCE 2-23 Periodic Maintenance Procedures
Measure the clearance for all four valves, one at time between the end of the valve stem and the adjusting screw [A] with the thickness gauge [8]Valve Clearance (when cold) Exhaust: 0.20 0.25 mm (0.0079 Inlet: 0.10 0.15 mm (0.0039 0.0098 in 0.0059 in
If the valve clearance is not correct, adjust it (see Valve
Clearance Adjustment) Then, turn the crankshaft counterclockwise with wrench on the alternator rotor bolt until "T-R" mark [A] on the alternator rotor aligns with the notch [8] as shown: the end of the compression stroke in the rear cylinder head Measure the clearance for all four valves, one at time between the end of the valve stem and the adjusting screw with the thickness gaugeValve Clearance (when cold) Exhaust: 0.20 0.25 mm (0.0079 Inlet: 0.10 0.15 mm (0.0039