2004 Kawasaki KVF750 4x4, Service Manual., Page 42Get this manual
2-24 PERIODIC MAINTENANCE Periodic Maintenance Procedures
Then, the crankshaft wrench turnthe alternator rotorcounterclockwise with on on bolt until "T-R" mark [A] the alternator rotor aligns with the notch [B] as shown: the end of the compression stroke in the rear cylinder headMeasure the clearance for all four valves, one at time between the end of the valve stem and the adjusting screw with the thickness gaugeValve Clearance (when cold) Exhaust: 0.20 0.25 mm (0.0079 0.0098 in Inlet: 0.10 0.15 mm (0.0039 0.0059 in
If the valve clearance is not correct, adjust it (see Valve Clearance Adjustment)
Valve Clearance Adjustment
the valve caps Removethe locknutadjusting the adjusting screw until the Loosen and turn clearance is correctadjusting screw [A] from turning and tighten the Hold the[B]locknut
Recheck the clearancerepeat the adjustment proceIf the clearance is incorrect,