2004 Kawasaki KVF750 4x4, Service Manual., Page 23Get this manual
PERIODIC MAINTENANCE 2-5 Torque and Locking Agent
The following tables list the tightening torque for the major fasteners, and the parts requiring use of non-permanent locking agent or liquid gasketLetters used in the "Remarks" column mean: AL: Tighten the two clamp bolts alternately two times to ensure even tightening torqueL: Apply non-permanent locking agentLB: Apply non-permanent locking agent (Three Bond TB2471, Blue)Lh: Left-hand Threads MO: Apply molybdenum disulfide oil solution (mixture of the engine oil and molybdenum disulfide grease in weight ratio 10:1)R: Replacement Parts S: Follow the specific tightening sequenceSS: Apply silicone sealant (Kawasaki Bond: 56019-120)St: Stake the fasteners to prevent looseningTB: Apply non-permanent locking agent (Three Bond TB1363A, Red)Fastener Fuel System Idle Adjusting Screw Bracket Bolt Element Cover Screw Element Holder Screws Clamp Bracket Bolt Fuel Pump Mounting Nuts Fuel Tap Plate Screws Fuel Tap Mounting Bolts Fuel Tap Cover Screws Fuel Tap Bracket Bolts Fuel Level Sensor Mounting Bolts Cooling System Radiator Mounting Bolts Radiator Fan Switch Radiator Fan Assembly Bolts Thermostat Housing Cover Bolts Coolant Temperature Warning Light Switch Air Bleeder Bolt Water Pump Cover Bolts Coolant Drain Plug Water Pump Impeller Water Pipe Mounting Bolts Engine Top End Rocker Case Bolts 55 mm (2.2 in Rocker Case Bolts 130 mm (5.1 in Rocker Case Bolts 30 mm (1.2 in Rocker Case Bolts 25 mm (1.0 in Cylinder Head Bolts (M10), first torque Cylinder Head Bolts (M10), final torque Cylinder Head Bolts (M6) Torque kgfm 0.90 0.35 0.35 1.0 0.80 0.08 0.50 1.0 0.80 0.20 0.90 1.8 0.50 0.90 0.70 0.90 0.90 0.90 0.80 0.90 0.90 1.0 1.0 1.0 2.5 5.0 1.0 Remarks