2004 Kawasaki KFX 700 V Force Factory Service Manual, Page 281Get this manual
BRAKES 12-9 Master Cylinder
Master Cylinder Removal
Remove: Banjo Bolt [A] Brake Hose
Master Cylinder Clamp Bolts [B] Master Cylinder [C]
CAUTION
Brake fluid quickly ruins painted surface; any spilled fluid should be completely washed away immediately
Master Cylinder Installation
The master cylinder clamp must be installed with the "UP" mark [A] upwardsthe upper clamp bolt first, and then the lower TightenboltThere will be gap at the lower part of the clamp
clamp after tighteningnew flat washer on Use and tighten the banjoeach side of the brake hose fitting, boltTorqueMaster Cylinder Clamp Bolts: 8.8 Nm (0.90 kgfm, 78 inlb)