2004 Kawasaki KFX 700 V Force Factory Service Manual, Page 268Get this manual
11-32 FINAL DRIVE Final Gear Case
6Pinion Gear Shims for Tooth Contact Adjustment Thickness 0.15 mm (0.006 in 0.2 mm (0.008 in 0.5 mm (0.020 in 0.8 mm (0.031 in 1.0 mm (0.039 in 1.2 mm (0.047 in Part Number 92180-1320 92180-1319 92180-1321 92180-1322 92180-1345 92180-1346
7Ring Gear Shims for Backlash Adjustment Thickness 0.15 mm (0.006 in 0.2 mm (0.008 in 0.5 mm (0.020 in 0.8 mm (0.031 in 1.0 mm (0.039 in 1.2 mm (0.047 in Part Number 92180-1318 92180-1316 92180-1317 92180-1315 92180-1343 92180-1344
Backlash Adjustment Clean any dirt and oil off the bevel gear teethInstall the pinion gear assembly with the primary shim 1.0 mm (0.039 in thicknessAssemble the final gear case (see Final Gear Case Assembly)Install the ring gear with the primary shim 1.0 mm (0.039 in thicknessCheck the backlash during tightening the cover bolts, and stop to tighten them immediately if the backlash disappearsThen, change the ring gear shim to thinner one