2004 Kawasaki KFX 700 V Force Factory Service Manual, Page 212Get this manual
9-16 CRANKSHAFTTRANSMISSION CrankshaftConnecting Rod
If the measured crankpin diameter [A] is not less than the service limit, but does not coincide with the original diameter marking on the crankshaft, make new mark on itCrankpin Diameter Marks None: 39.98439.992 mm (1.57421.57449 in39.99340.000 mm (1.574521.5748 in
Crankpin Diameter Mark [B]: "
" mark or no mark
Measure the connecting rod big end inside diameter, and mark each connecting rod big end in accordance with the
inside diameterTighten the big end nuts to the specified torqueTorqueConnecting Rod Big End Cap Nuts: 34 Nm (3.5 kgfm, 25 ftlb)
The mark already on the big end should almost coincide with the measurement because of little wearConnecting Rod Big End Inside Diameter Marks None: 43.00043.008 mm (1.69291.69323 in43.00943.016 mm (1.693261.6935 in