2004 Kawasaki KFX 700 V Force Factory Service Manual, Page 129Get this manual

2004 Kawasaki KFX 700 V Force Factory Service Manual, Page 129

ENGINE TOP END 5-21 Camshaft

Remove: [A] Circlips
Weights [B] Spring [C]

Do not remove the shaft [A] and pin [B]If the parts are removed, they cannot be reinstalled
KACR Installation

Install: Weights

Circlips Spring [A] Hook the spring from the outside with the open side of the hook inwardsInstall: KACR Unit Hook the arms [B] on the pinsApply non-permanent locking agent to the camshaft sprocket bolts [C] and tighten themTorqueCamshaft Sprocket Bolts: 12 Nm (1.2 kgfm, 104 inlb)

Back to 2004 Kawasaki KFX 700 V Force Factory Service Manual