2004 Kawasaki KFX 700 V Force Factory Service Manual, Page 71Get this manual
FUEL SYSTEM 3-15 Carburetor
tang [A] Bend theheighton the float arm very slightly to change the float
Float Height Standard: 4.0 mm (0.157 0.040 in
Measure the float height [A] from the mating surface [B] of float by tilting the carburetor so that the tang of the float [C] just touches the needle rod [D]At this time, the float valve [E] rod must not be depressedIncreasing the float height lowers the fuel level and decreasing the float height raises the fuel levelAssemble the carburetor and recheck the fuel levelIf the fuel level cannot be adjusted by this method, the float or the float valve is damaged