2004 Kawasaki KFX 700 V Force Factory Service Manual, Page 70Get this manual
3-14 FUEL SYSTEM Carburetor
Set the carburetor [A], fuel level gauge [B], and fuel [C] as followsSpecial ToolFuel Level Gauge: 570011017
Place the additional graduation [D] 10 mm (0.39 in higher than the top graduation [E]Put the carburetor horizontally and so that the outlet side faces downwardConnect the fuel gauge and hose to the drain fitting of the carburetorConnect the fuel to the fuel inlet fitting210 mm (8.27 in [F] 12 mm (0.47 in [G] Hold the gauge so that the additional graduation is placed slightly higher than the punch mark [H]Feed the fuel into the carburetor, then loosen the carburetor drain screwthe fuel level in Wait until gauge vertically the gauge settlesso that the and lower it slowly Hold the graduation aligns with the punch markadditional
Special ToolCarburetor Drain Plug Wrench, Hex 3: 570011269
Do not align the additional graduation on the gauge lower than the punch markIf it is lowered and then raised, the gauge will show fluid level that is higher than the actual level, which will require remeasurementthe Read fuel fuel level [G]adjust itIf the level is incorrect,