2004 Kawasaki KFX 700 V Force Factory Service Manual, Page 40Get this manual
PERIODIC MAINTENANCE 2-23 Periodic Maintenance Procedures
all at time Measure the clearance forvalvefour valves, one adjusting between the end of the stem and the screw [A] with the thickness gauge [B]Valve Clearance (when cold) Exhaust: 0.200.25 mm (0.00790.0098 in Inlet: 0.100.15 mm (0.00390.0059 in
If the valve clearance is not correct, adjust it (see Valve Clearance Adjustment)the crankshaft Then, turnthe alternator rotorcounterclockwise with on wrench on bolt until "T-R" mark [A] the alternator rotor aligns with the notch [B] as shown: the end of the compression stroke in the rear cylinder headMeasure the clearance for all four valves, one at time between the end of the valve stem and the adjusting screw with the thickness gaugeValve Clearance (when cold) Exhaust: 0.200.25 mm (0.00790.0098 in Inlet: 0.100.15 mm (0.00390.0059 in