2004-2006 Kawasaki Prairie 700 4x4, KVF 700 4x4 service manual, Page 409Get this manual

2004-2006 Kawasaki Prairie 700 4x4, KVF 700 4x4 service manual, Page 409

ELECTRICAL SYSTEM 17-19 Battery
Take the electrolyte container out of the vinyl bag Detach the seal caps [A] from the container
0 00 not discard the seal caps because it is used as the battery plugs later0 00 not peel back or pierce the seals [8] on the container
QPQ80J02S C

Place the electrolyte container upside down aligning the six seals with the si battery filler ports Push the container down strongly enough to break the sealsNow the electrolyte should start to flow into the battery
000 not tilt the container as the electrolyte flow may be interrupted
Make sure air bubbles [A] are com ing up from all six filler portsOLeave the container this way for minutes or longer