2004-2006 Kawasaki Prairie 700 4x4, KVF 700 4x4 service manual, Page 153Get this manual
5-46 ENGINE TOP END Exhaust System
Muffler and Exhaust Pipe Installation
If the exhaust pipe cover [A] or muffler cover [8) were removed, tighten themTorqueExhaust Pipe Cover Bolts [C): 8.8 N'm (0.90 kgf'm, 78 in'lb) Muffler Cover Bolts [0]8.8 N'm (0 .90 kgf-m, 78 in'lb)
Replace the exhaust pipe gaskets [E] and clamp gasket [F] with new ones Install (But do not tighten the following nuts and bolts: Front Exhaust Pipe [G], Clamp [H ], Muffler and Nuts Rear Exhaust Pipe [I] and Nuts Muffler Mounting Bolts [J] Tighten: Exhaust Pipe Nuts evenly Apply non-permanent locking agent to the muffler mounting bolts and tighten them Torque Muffler Mounting Bolts: 20 N'm (2.0 kgf'm, 14 ft b)