2003 Kawasaki KLF250 Service Manual., Page 254Get this manual
16-12 ELECTRICAL SYSTEM Battery
Battery Removal
Remove: Frame chapter) Seat (see
Battery Holder [A] Disconnect the battery negative (-) cable [B] first, and then the positive (+) cable [C]Take out the battery [D]
Battery Installation
Connect the positive cable first and then the negative cable Put light coat of grease on the terminals to prevent corrosion Route the battery vent hoseinaccording to the Cable, Wire, and Hose Routing section Appendix chapterElectrolyte Level Inspection
The electrolyte level should be between the upper and lower level lines [A]If the level of electrolyte in any cell is below the lower level line, add only distilled water to the cell, until the level is at the upper level line
CAUTION