2003 Kawasaki KLF250 Service Manual., Page 177Get this manual
11-10 FINAL DRIVE Output Bevel Gear Case
Install: Housing [A] Bearing
Driven Gear Shaft [B] Collar [C] Toothed Washer [D] Washer [E] Driven Gear Shaft Nut [F]
Apply non-permanent locking agent: Driven Gear Shaft Nut [A] Install the driven gear shaft nut so that the flat side [B] faces upward Tighten:
Special ToolsBevel Gear Holder: 57001-1193 Socket Wrench: 57001-1354
TorqueDriven Gear Shaft Nut: 147 Nm (15 kgfm, 108 ftlb)