2003-2006 Kawasaki KFX400 service manual, Page 267Get this manual
CHASSIS
Install the sprocket flange to the axle shaft Apply SUZUKI BOND "1207B" or "1215" to the axle shaft99104-31140: SUZUKI BOND "1207B" (USA) 99000-31110: SUZUKI BOND "1215" (Others) Apply THREAD LOCK SUPER "1303" or "1322" to the thread portion of the rear axle shaft99000-32030: THREAD LOCK SUPER "1303" (USA) 99000-32110: THREAD LOCK SUPER "1322" (Others) Install the concave washers and tighten the inner axle shaft nut inner to the specified torque with the special toolAxle shaft nut (inner): 180 Nm (18.0 kgf-m, 130.0 lb-ft) 09940-92450: Rear axle nut holder NOTE: When tightening the axle nut with the special tool, the reading torque on the torque wrench is smaller than actual torque that is applied to the axle nutTherefore convert the tightening torque( 6-88) Apply THREAD LOCK SUPER "1303" or "1322" to the thread portion of the rear axle shaft99000-32030: THREAD LOCK SUPER "1303" (USA) 99000-32110: THREAD LOCK SUPER "1322" (Others)