2003-2006 Kawasaki KFX400 service manual, Page 139Get this manual
Install the dowel pins Place each camshaft journal holders and cam chain guide into the correct positionNOTE: Camshaft journal holders marked "EX" are for the exhaust side and those marked "IN" are for the intake side
Tighten the camshaft journal holder bolts to the specified torqueCamshaft journal holder bolt: 10 Nm (1.0 kgf-m, 7.0 lb-ft) NOTE: When tightening the camshaft journal holder bolts, the piston position must be at TDC on the compression stroke
CYLINDER HEAD COVER
Thoroughly wipe off oil from the fitting surfaces of the cylinder head and cover Apply SUZUKI BOND "1207B" to the end caps of the cylinder head cover gasket as shown99104-31140: SUZUKI BOND "1207B" (USA) 99000-31140: SUZUKI BOND "1207B" (Others)