1995-2004 Kawasaki Lakota 300, Lakota Sport, KEF300 Service Manual, Page 138Get this manual
WHEELSTIRES 8-5
Repeat the straightedge procedure on the other side of the vehicleNow the front wheels are parallel to each other and to the centerline of the vehicleFront Wheels [AJ Straightedges [0] Vehicle Center Line [8] Rear Wheels [E] Parallel each other [C] .Go on to the Toe-in Inspection procedure
Toe-in Inspection
Support the vehicle on stand or the jack so that the front wheels are off the groundSpecial Tool Jack:
.Applya heavy coat of the chalk near the center of the front tires Using needle nose scriber, make thin mark near the center of the chalk coating while turning the wheel
Keeping the front wheels off the ground, set the handlebar straight ahead At the level of the axle height, measure the distance between the scribed lines for both front and rear of the front tires Subtract the measurement of the front from the measurement of the rear to get the toe-inIf the toe-in is not in the specified range, go on to the Toe-in Adjustment procedureof Front Wheels Standard: 10 "'" 30 mm