1987-2004 Kawasaki Mojave KSF250 Service Manual, Page 184Get this manual
ELECTRICAL SYSTEM Ignition Coil Removal eRemove the front fender (see Front Fender Removal in the Frame chapter).Pull the spark plug lead off the spark plugeDisconnect the leads from the coileTake out the bolt and remove the coilIgnition Coil Arcing Distance Measurement -Measure the arcing distance with Kawasaki Electro Tester (special tool) to check the condition of the ignition coilNOTE
oSince tester other than the Kawasaki electrotester may produce different arcing distance, the Kawasaki elctrotester is recommended for reliable results
-Connect the ignition coil (with the spark plug,cap left installed at the end of the spark plug lead) to the tester, and measure the arcing distanceIgnition Coil Arcing Distance mm or more
WARNING
AIgnition Coil BBolt
aTo avoid extremely high voltage shocks, do not touch the ignition coil body or leads
Ignition Timing Inspection (Dynamic) This model has Capacitor Discharge Ignition (CDI) systemSince the CDI system has no mechanical parts such as cam or contact breakers, no periodic