1987-2004 Kawasaki Mojave KSF250 Service Manual, Page 170Get this manual
STEERING -Tighten the tie-rod end nuts to the specified torque (see Exploded View)-Inspect the toe-in if necessary (see Toe-in Inspection in WheelsTires chapter)
Steering Maintenance
Steering Inspection
-Turn the handlebar left and right, and check the steeri ng actionIf the steering action is not smooth, or if the steering binds or catches before the stop, lubricate the steeringNOTE
Tie-rod End Removal
-Remove the tie-rod-Holding the tie-rod flattened area, loosen the locknut and unscrew the tie-rod end
oThe cables and wires will have some effect on the steering action which must be taken into account-Check the steering action againIf the steering lubrication does not remedy the problem, inspect the steering stem warp, steering stem clamps, and tie-rod bearingsIf you feel looseness, or if the steering rattles as it turns, check the tightness of the steering bolts and nuts-Tighten loose bolts and nuts to the specified torque (see Exploded View), and check the steering action againIf the steering action does not change by tightening the bolts and nuts, inspect the steering stem clamps, steering stem bearing, tie-rod bearings, and steering knuckle joints