1987-2004 Kawasaki Mojave KSF250 Service Manual, Page 148Get this manual
BRAKES 11-13 111 11"
Disc Installation Notes -Tighten the disc mounting Allen bolts to the specified torqueThe disc must be installed with the chamfered hole side facing toward the front hub or the disc holderThe marked side should face outward
Rear Disc Thickness Standard Service Limit
Disc Cleaning Poor braking can be caused by oil on discOil on disc must be cleaned off with an oilless cleaning fluid such as trichloroethylene or acetone
I WARNING
OThese cleaning fluids are usually highly flammable and harmful if breathed for prolonged periodsBe sure to heed the fluid manufacturer's warnings
AMarked Side
Disc Warp InspectionJack up the vehicle so that the wheels are off the ground-For front disc inspection, remove the front wheels, and turn the hand.lebar fully to one side-Set up dial gauge against the disc as shown, and measure disc runoutIf runout exceeds the service limit, replace the disc