1987-2004 Kawasaki Mojave KSF250 Service Manual, Page 125Get this manual
9-12 WHEELSTIRES ODrive the bearing out by tapping on the exposed portion of the spacer pipe end with hammer and metal rodThe grease seal may be tapped out with the bearingeRemove the hub assembly (see Front Hub Removal) eTurn each bearing back and forth while checking for roughness or bindingIf roughness or binding is found, replace the bearingeExamine the bearing seal for tears or leakageIf the seal is torn or is leaking, replace the bearing
Rear Hub
Rear Hub DisassemblyAssembly Note eDo not press the hub bolts outIf the hub bolt is damaged, replace the hub and bolts as unitAMetal Rod
olnsert the spacer pipe into the hub assemblyoDrive out the remaining bearing and grease seal by tapping on the spacer pipe with suitable drivereDeburr the spacer pipe as needed