1987-2004 Kawasaki Mojave KSF250 Service Manual, Page 119Get this manual
96 WHEELSTIRES -Keeping the front wheels off the ground, set the handlebar straight ahead-At the level of the hub height, measure the distance between the scribed lines for both front and rear of the front tires
DUneven thread length could cause tie-rod damageTie-rod Length Adjustment
-Subtract the measurement of the front from the measurement of the rear to get the toe-inIf the toe-in is not in the specified range, go on to the Toe-in Adjustment procedureToe-in of Front Wheels Standard: 20 mm
1Tie-rod Ends 2Visible Thread Length 3Flattened Area
4Tie-rod Length 5Outside
-Check the toe-in (see Toe-in !nspection)-Tighten the tie-rod locknuts to the specified torque (see Exploded View)-Test ride the vehicle