2004 John Deer Buck Utility ATV 500, 500EX and 500EXT Service Manual, Page 168Get this manual

2004 John Deer Buck Utility ATV 500, 500EX and 500EXT Service Manual, Page 168

Refer to TESTS section Refer to TESTS section
Remove the steering coverRefer to BODYFRAMEUnplug the connectors of the power outletUnscrew the retaining nutMX30905

Reverse the removal procedureSelect high intensityBeam aiming is correct when center of high beam is 131 mm (5 in) below the headlight horizontal center line, scribed on test surface, (17 ft) away
Refer to TESTS section
Unplug headlamp connector
Measure headlamp center distance from groundScribe line at this height on test surface (wall or screen)Light beam center should be 131 mm (5 in) below scribed line

Back to 2004 John Deer Buck Utility ATV 500, 500EX and 500EXT Service Manual