2004 John Deer Buck Utility ATV 500, 500EX and 500EXT Service Manual, Page 112Get this manual
1 Place crankshaft into rear crankcase housing (magneto side)Do not install spacer on clutch side at this timeUsing depth gauge, measure distance between crank web and housing edgeThis is the dimension "B"
V01C2EA
V01c2ea2.EPS
Connecting Rod Big End Axial Play: Using feeler gauge, measure distance between thrust washer and crankshaft counterweightIf the distance exceeds specified tolerance, replace the crankshaftConnecting Rod Big End mm (in Service Limit Axial play Radial play 1.3 mm (0.05 in 0.08 mm (0.003 in
V01C2FA
V01c2fa2.EPS