2004 John Deer Buck Utility ATV 500, 500EX and 500EXT Service Manual, Page 88Get this manual

2004 John Deer Buck Utility ATV 500, 500EX and 500EXT Service Manual, Page 88

installing magneto coverPiston can rotate in its bore If there is gap between magneto cover and crankcase housing, check position of the hydraulic piston
P0008382

Torque cover to specification
P0008454

Remove the magneto cover no1Inside magneto cover, unscrew bolts no15 and the support wire no14Unscrew bolts no3 and no13 retaining stator no4 and trigger coil no6Remove connector from magneto housing cover

Back to 2004 John Deer Buck Utility ATV 500, 500EX and 500EXT Service Manual