2009-2012 Honda MUV700 Big Red Service Manual, Page 526Get this manual
REAR DRIVING MECHANISM RING GEAR CLEARANCE INSPECTION Install the differential assembly with the shim into the case coverMeasure the clearance between the ring gear and stop pin with feeler gauge CLEARANCE: 0.30.6 mm (0.010.02 in)
STOP PIN Remove the differential assemblyBe sure ro wear heavy gloves 10 avoid burns when landling the hea led case coverUs ing ro rch 10 Ileal tile case cover may cause warpage
If the clearance is not within specification, heat the case cover to approximately 80C (176F) and remove the stop pin by tapping the coverInstall stop pin shim to obtain the correct clear anceStop pin shims: 0.10 mm (0.004 in) B: 0.15 mm (0.006 in) Drive the stop pin into the case cover