2009-2012 Honda MUV700 Big Red Service Manual, Page 518Get this manual
REAR DRIVING MECHANISM GEAR TOOTH CONTACT PATTERN CHECK Keep deiSf and din our of the case and cover
Apply thin coat of Prussian Blue to the pinion gear teeth for tooth contact pattern checkInstall the ring gear shims onto the differential assembly
Install the differential assembly into the gear case
DIFFERENTIAL
If is imponanr to
the pin ion wh ile righ rening the bolts If the ring gear shims is roo th ick, the gears will lock afrer only light righrenmg(lIm
Install the case cover and tighten the bolts in several steps until the cover evenly touches the gear case Thenwhile rotating the pinion gear, tighten the bolts to the specified torque in crisscross pattern in several stepsTORQUE: 10 mm bolt: 46.5 N'm (4.7 kgfm, 34Ibf.ft) mm bolt: 25 N'm (2.6 kgf.m, 19 Ibf.ft)