2009-2012 Honda MUV700 Big Red Service Manual, Page 490Get this manual
FRONT DRIVING MECHANISM Install the holder bracket and cove base with the two bolts, and tighten them
TORQUE: 10 'm (1.0 kgfm, Ibf.ft)
Set the drive mode se lector lever to the 2WD positionInstall the spring onto the selector cableInsert the cable into the cab le holder and connect it to the clutch arm with the jo int pin and adjusting nutSet the groove in the cable grommet onto the cover base end properlyInstall the retaining plate onto the cable ith the concave facing the cable holder to secure the cable
Operate the differential lock arm to th upper side to set it to the lock free position Connect the differential lock cable to the lock arm and install it into the cable ho lder by aligning the flat surfaces Install the washer and new cotter pin Make sure that [he dnve mode seeelOr lever IS 2WD position and the differential lock" arm