2009-2012 Honda MUV700 Big Red Service Manual, Page 485Get this manual
FRONT DRIVING MECHANISM Place the driver, attachment and pilot on the top of the bearing and tape the driver to the compressor
Driver Attachment, 22 Pilot, 15 mm
079493710001 077460010800 07746-0040300
Place the bearing and tool assembly into freezer for at least 30 minutesUsi ng heat gun, heat the gear case to (176 F) Remove the bearing and tool assembly from the freezer and drive the bearing into the gear case using the special tools Only strike the driver onceIf you strike it more than once the stopper ring may slip out of the groove If this happens, remov the ring and bearing, and install new ring Make sure that the stopper ring is securely set in the groove of the gear case