2009-2012 Honda MUV700 Big Red Service Manual, Page 445Get this manual
BRAKE SYSTEM Install the pad retainers onto the bracketInsta ll new pin boots into the grooves in the bracketApply silicone grease to the sliding area of the slide pinsDo nor imerchange the pin and B
Install slide pin (flat surfaces) and pin (round surface) into the caliper bracket to be sure each boot rib is seated to the boot groove in the pin Install the pad spring as shown
RETAINERS
(Lower side)
Install the brake pads onto the caliper bracket so the wear indicator on the inner pad is facing the upper side Install the caliper body onto the caliper bracket with the slide pin bolts