2009-2012 Honda MUV700 Big Red Service Manual, Page 368Get this manual
FRONT WHEELSUSPENSION Install the breaker arm assembly over the center shaft and adjust the upper rim supports to fit the outside rim diameterInstall the top hold down nut and tighten it finger ight
BREAKER ARM ASSY
Failure to back out the breaker shoe two turns will cause the shoe to scratch the bead lock, wh ich may cause the tire to leak
Pull the leverage bar down so the breaker shoe is just below the rim lipTurn the crank to fully push the breaker shoe between the ire bead and rimOnce the shoe contacts the rim, back the crank out two turns to al low the shoe to clear the rim's bead lock