2009-2012 Honda MUV700 Big Red Service Manual, Page 219Get this manual
ENGINE REMOVALINSTALLATION Check the mounting rubbers, bushings and dust seals for deterioration, wear or damage
MOUNTING RUBBERS
BUSHING
ENGINE INSTALLATION
NOTE Route the wires, cables and hoses properly (page
1-21 )Install the lower mounting bushings into th engine lower mountsInstall the dust seals ith the lip side facing out SEAL LIPS
BUSH ING
HOld che eng.ne securely and be
carefunol co
dJmage Ille Irame and engme
Temporarily place the engine on the floor from the left side, then place the eng ine in to the fram and support it in position with suitable wooded blocks
BRACKETS
Do not hold or strike the solenoid valves on the shift valve body during engine removal Holding the solenoid valve or excessive shock may damage the solenoid valveInstall the mounting rubbers onto the lower mounting bush ing with the large 1.0side facing in