2009-2012 Honda MUV700 Big Red Service Manual, Page 177Get this manual
FUEL SYSTEM (PGM-FI) FUEL FLOW INSPECTION Relieve the fuel pressure (page 6-31 )Disconnect the quick connect fitting from the fuel njector (page 6-31)Remove the uel pump relay (page 6-38) Connect the Blackyellow and Brown wire termina ls of the fuel pump relay (relay box) connector using jumper wire FUEL PUMP RELAY CONNECTOR (Terminal side of the relay boxBrown
Blackyellow
JUMPER WIRE Place the end of the fue feed hose into an approved gasoline container Turn the ignition switch to ON (I) for 10 seconds and turn it to OFF (0)Measure the amount of fue flowAm unt of fuel flow86 em (2.9 US OZ, 3.0 Imp oz) minimum l0 seconds at 12 If the fuel flow is less than specified volumeinspect the following- fuel pump (page 636)pinched or clogged fue feed hose Connect the quick connect fitting to the fuel injector (page 6-33)Remove the jumper wire from the relay box connector and install the following- fue pump relayrelay box coverbattery box cover (page 21-6 )