2009-2012 Honda MUV700 Big Red Service Manual, Page 107Get this manual
MAINTENANCE Adjust the valve clearance by loosening the lock nut and turning the adjusting screw until there is slight drag on the feeler gaugeHold the adjusting screw and tighten the lock nut
TORQUE: 17 Nm (1.7 kgfm, 12 Ibf.ft)
After tightening the lock nut, recheck the valve clearance
Coat new O-rings with oil and install them into the groove in each valve adjusting hole capInstall the valve adjusting hole caps and tighten the bolts secu rely