2009-2012 Honda MUV700 Big Red Service Manual, Page 95Get this manual
FRAMEBODY PANELSEXHAUST SYSTEM INSTALLATION If the joint stud bolts are loose, tighten themBe sure to verify the distance from the top of the stud to the cylinder head as shownAlways repace the gaskets with new ones
Install new gasketsBefore mounting the exhaust system, assemble the exhaust pipe and mufflerInstall the exhaust pipemuffler assembly with the mounting bolts and joint nuts by setting the exhaust pipe flange onto the stud bolts properly, then install the mounting nutsAfter mounting the exhaust system, tighten each fastener in the sequence belowTighten the joint nuts first, then tighten the mounting nutsTighten the muffler band boltsTORQUE: Muffler band bolt: 22 Nm (2.2 kgfm, 16Ibf.ft)