2009-2012 Honda MUV700 Big Red Service Manual, Page 63Get this manual
TECHNICAL FEATURES 1st gear and Reverse gear Gear position ATClutch PC Solenoid Shift Solenoid ON OFF ON OFF 1st "Engaged" '; EngagedShift Clutch 2nd
1stJReverse (idling) 1stiAeverse (driving) I
The hydraulic passage is connected to supply hydraulic oil to the 1st shift clutch, and the clutch is engagedOil is sup pi ied by way of: AJT clutch PC solenoid valve ': 1-2 Shift valve =!" 1st Shift clutch (Oil is drained by way of: 2nd Shift clutch 2-3 Shift valve ;, '-2 Shift valve 3rd Shift clutch 2-3 Shift valve) At idling, the AIT clutch PC solenoid valve is on (valve closed) to eliminate vehicle creepAt start up, the AfT clutch PC solenoid valve controls the clutch hydraulic pressure to the linear valve according to the signal from the PCM At driving, the AJT clutch PC solenoid valve is off (valve open) supplying sufficient hydraulic oil to the shift clutch Control of the hydraulic passage during driving in Reverse gear is the sameHowever, the vehicle can be driven only in the 1st-hold mode (no shift)