2009-2012 Honda MUV700 Big Red Service Manual, Page 59Get this manual
TECHNICAL FEATURES
AUTOMATIC TRANSMISSION SYSTEM
OUTLINE
The three-speed Automatic Transmission (AJT) system used in the MUV controls gear selection by utilizing torque con verter and three hyd raulic shift clutchesTo control the hydraulic clutches to shift, the system changes the supply of hydraulic pressure to each clutch (1st, 2nd, 3rd) by activating the respective spool valves with the corresponding solenoid valvesEach solenoid valve is controlled by the PCM, that detects the signal from each sensor and switch The hydraulic oil for this system is the engine oil, which is supplied from the engine lubrication oil pump (page 5-2)The valve body, which incorporates solenoid valves and spool valves, that is positioned on the crankcase cover to facilitate maintenance (page 14-28) The sub-transmission is pOSitioned in front of the output shaft, and selecting Drive, Neutral, or Reverse can be made mechanically by operating the selector lever located near the steering wheel