2007-2009 Honda TRX300EX TRX300X service manual, Page 264Get this manual
REAR WHEELSUSPENSION bearing holder (by tapping it from the right side) O-rings
INSPECTION
Set the axle in v-blocks and measure the axle ru nout ith dial indicatorActual runout is 12 the total indicator reading SERVICE LIMIT: 3.0 mm (0.12 in)
Turn the inner race of each bearing with your fingerThe bearing should turn smoothly and quietlyAlso check that the bearing outer races fit tightly in the holderReplace the bearmgs in pairs
BEARING
Replace the bearings if the races do not turn smoothly and quietly or if they fit loosely in the holder
BEARING REPLACEMENT