2007-2009 Honda TRX300EX TRX300X service manual, Page 253Get this manual
FRONT WHEELSUSPENSIONSTEERING A difference between the distances should be 3.0 mm (0.12 in) or
Adjust the tie-rod length so that the distance between each lock nut and thread end is 5.0 mm (0.20 in)5.0 mm (0.20 in) Hand-tighten the ball joint lock nuts
lessThe ball joint positions are 20:1: 3" from each otherTighten these nuts after installing the tie-rod
5.0 mm (0.20 in)
INSTALLATION
Install the tie-rod onto the steering shaft and knuckle with the flat side (wrench holding area) of the rod toward the knuckleBe careful not to damage the ball joint boots